MFM-Papago Map 101104 Feedback

Moderators: Moderators, Regional Mappers

76gpsguy
Polygon Mapper
Posts: 207
Joined: Tue Sep 16, 2008 10:15 pm
Location: Puchong, SEL (Symbian MXT)

MFM-Papago Map 101104 Feedback

Postby 76gpsguy » Sat Nov 06, 2010 7:03 am

Please post your comments and feedback strictly for MFM-Papago Map 101104 only.

All posts must state the Papago version which you are using currently as per below format or it will not be entertained and responded.

PPG version : [M3GPS / Eastgear / iPhone / Android / WM Retail / WM HTC ] – [X2 / X3SE / M6 / M7 / ….]

e.g.
PPG version : M3GPS – X3SE
Feedback : ……….


Please note that MFM-Papago map only support the above said Papago versions, any feedback in relation to Papago other than the above versions will not be entertained and responded.

batoo
Posts: 1
Joined: Fri Oct 31, 2008 12:46 pm

Re: MFM-Papago Map 101104 Feedback

Postby batoo » Sat Nov 06, 2010 11:08 am

Hi,

Thanks for the great work,

just installed the map on my WM phone PPG (standard map)

I just noticed that POI in the map version got problem! if you try to tap on POI SEARCH then KEY WORDS, try to search any poi, it fails! in contrast with the previous map version (april 2010), where you can seek any POI smoothly.

TQ

leoyew
Posts: 5
Joined: Mon Jul 12, 2010 8:36 pm

Re: MFM-Papago Map 101104 Feedback

Postby leoyew » Sat Nov 06, 2010 11:26 am

Finally ! 我等到花儿也谢了!hehe, but i wish that the papago map can support latest papago M7 software, if it could be done i can said Malfreemap is the best !

User avatar
azlan96
Posts: 270
Joined: Tue May 25, 2010 6:45 pm
Location: Ampang, Selangor
Contact:

Re: MFM-Papago Map 101104 Feedback

Postby azlan96 » Sat Nov 06, 2010 11:33 am

leoyew wrote:Finally ! 我等到花儿也谢了!hehe, but i wish that the papago map can support latest papago M7 software, if it could be done i can said Malfreemap is the best !

it does

Supported Devices/Softwares
* M3GPS Papago X3, X5~X7
* Eastgear Papago X3
* Papago X5 for Android
* Papago M6~M7 for iPhone

=P~

User avatar
zamad
Valued Contributor
Posts: 2311
Joined: Sun Sep 21, 2008 12:50 am
Location: Shah Alam

Re: MFM-Papago Map 101104 Feedback

Postby zamad » Sat Nov 06, 2010 2:01 pm

batoo wrote:Hi,

Thanks for the great work,

just installed the map on my WM phone PPG (standard map)

I just noticed that POI in the map version got problem! if you try to tap on POI SEARCH then KEY WORDS, try to search any poi, it fails! in contrast with the previous map version (april 2010), where you can seek any POI smoothly.

TQ

That is strange... I just did a drive around Shah Alam after selecting POIs and I did not experience what you did. Works fine on my PND.

PPG Version: M3GPS - X5SE
PPG Unit: R5800
mfm : magnificent free maps
Garmin nüvi 2575RLM v2.80, Garmin 60CSx v4.00, Garmin nüvi 205W(patched), Papago R5800 X8.5, Qstarz Q1000P (Datalogger)
Retired: GMXT Palm T|X, nuvifone A10 v5.0.77, Garmin-Asus G60 v2.43, GPSlim236 (Datalogger)

User avatar
shawchyn
Valued Contributor
Posts: 781
Joined: Mon Nov 30, 2009 5:41 pm
Location: Kuala Lumpur
Contact:

Re: MFM-Papago Map 101104 Feedback

Postby shawchyn » Sat Nov 06, 2010 2:05 pm

zamad wrote:
batoo wrote:Hi,

Thanks for the great work,

just installed the map on my WM phone PPG (standard map)

I just noticed that POI in the map version got problem! if you try to tap on POI SEARCH then KEY WORDS, try to search any poi, it fails! in contrast with the previous map version (april 2010), where you can seek any POI smoothly.

TQ

That is strange... I just did a drive around Shah Alam after selecting POIs and I did not experience what you did. Works fine on my PND.

PPG Version: M3GPS - X5SE
PPG Unit: R5800


He is refer to the "standard" map for Windows Mobile Version of Papago X5. This is an "known" issue. Patches will be reloaded in few days time.
Snake Chia
http://appsblog.snakechia.com
http://www.nearby.com.my

pasculy
Posts: 3
Joined: Sun Jan 24, 2010 3:30 pm

Re: MFM-Papago Map 101104 Feedback

Postby pasculy » Sat Nov 06, 2010 2:46 pm

My patience paid off. Downloaded this morning & had tried driving around Penang, only few POI showed error when it was selected. The rest, satellite locking was quite decent, at first it took 5 minutes. After driving around, shutting it down & turn it on, satellite locking stabilized, around 45 second to 1 minute.

BTW, I'm using R5800 with latest routing fix & X5SE. Thanks to the team & contributor.

:champ:

User avatar
nelsonlee
Posts: 6
Joined: Mon Apr 05, 2010 5:33 pm

Re: MFM-Papago Map 101104 Feedback

Postby nelsonlee » Sat Nov 06, 2010 5:52 pm

[-( Tested and the feedback is very lagge even for simulation.....
[-X Maybe you need to workout the Standard.mb6 file to make it run smooth!!

Regards,
Nelson

mission8
Posts: 3
Joined: Sun Jul 11, 2010 4:18 pm

Re: MFM-Papago Map 101104 Feedback

Postby mission8 » Sat Nov 06, 2010 5:57 pm

I just discovered that it doesn't display junction view with this new map.
Can someone pls advise?

User avatar
nelsonlee
Posts: 6
Joined: Mon Apr 05, 2010 5:33 pm

Re: MFM-Papago Map 101104 Feedback

Postby nelsonlee » Sat Nov 06, 2010 6:06 pm

mission8 wrote:I just discovered that it doesn't display junction view with this new map.
Can someone pls advise?


Tested and have junction view.....you may need to check on your advance setting.....
The new maps still need to improve for Standard.m6 file, because it still lagge!!

Regards,
Nelson


Return to “Archive (Papago)”

Who is online

Users browsing this forum: No registered users and 3 guests