MFM-Papago X8 Map 110823 Feedback

Moderators: Moderators, Regional Mappers

gpsmy
Posts: 134
Joined: Sun Mar 01, 2009 8:50 pm
Location: Holux GPSmile 62E, GMXT, Ovi Map

Re: MFM-Papago X8 Map 110823 Feedback

Postby gpsmy » Mon Aug 29, 2011 7:13 pm

The X8 map is meant for Papago new X8 release. It will only work with X8 version 8.5 onward. Don't waste time to try until you get your software upgraded to X8 version 8.5. :ko: :ko: :ko:

eriko_teng
Posts: 2
Joined: Thu Mar 10, 2011 10:52 am

Re: MFM-Papago X8 Map 110823 Feedback

Postby eriko_teng » Wed Aug 31, 2011 10:43 am

PPG version : M3GPS – X8
Brand/Model: china brand
Feedback : after update cant open the papago. Application Navi.exe encountered a serious error and must shut down

PiGz
Posts: 3
Joined: Wed Jul 20, 2011 12:36 pm

Re: MFM-Papago X8 Map 110823 Feedback

Postby PiGz » Wed Aug 31, 2011 4:52 pm

Hi that, Good day, i have some problem of a address i can't found in the map:

Embassy of the United States Kuala Lumpur
376 Jalan Tun Razak
50400 Kuala Lumpur
Malaysia

khang91
Posts: 30
Joined: Sat Feb 12, 2011 1:54 am

Re: MFM-Papago X8 Map 110823 Feedback

Postby khang91 » Wed Aug 31, 2011 6:06 pm

how about papago android x5???

User avatar
captzot
Posts: 51
Joined: Thu Mar 11, 2010 11:25 pm

Re: MFM-Papago X8 Map 110823 Feedback

Postby captzot » Thu Sep 01, 2011 1:31 pm

PPG version : Papago X8.5 Build:Jul 8 2011
Brand/Model: R6300T
Feedback :
From Simpang Ampat, Penang to Tanah Merah, Kelantan, the route suggested was going all the way down to KL, then through Karak to Kuantan and all the way up to destination.

The original MFM PPG version 01-6-11 that came with the unit shows proper way through East-West highway, but suggesting route through Baling at 5°38'66''N 100°49'34''E instead of new highway (Jalan Baling-Grik K173) by-passing Baling town. Ignoring it, it will re-route through K173 until 5°33'40''N 100°53'13''E, then asked you to go back (u-turn). Looks like it was lost between this point until about 7 km later. Then the route continue.

On the way back from Tanah Merah to Penang, your new MAP 110823 will suggest the route through Cameron Highland, taking left turn at Jeli 5°42'26''N 101°50'38''E after driving along Road 4 from Tanah Merah.

The original map was correct for using Road 4 all the way until junction at 5°27'32''N 101°8'14''E. It suggest right turn using old road through Baling instead of using new Jalan Baling-Gerik (which should be a proper path), kept insisting a u-turn after passing the junction.

Sorry for no proper tracking. Draft this feedback with help of Google Earth and memory recollection.

Best regards,
Capt Zot

User avatar
tympg
Senior Mapper
Posts: 1586
Joined: Mon Sep 15, 2008 11:01 am
Location: Penang

Re: MFM-Papago X8 Map 110823 Feedback

Postby tympg » Thu Sep 01, 2011 4:22 pm

PiGz wrote:Hi that, Good day, i have some problem of a address i can't found in the map:

Embassy of the United States Kuala Lumpur
376 Jalan Tun Razak
50400 Kuala Lumpur
Malaysia

For the US Embassy in KL, it's listed as "USA Embassy" in the MfM map. (Search POIs, don't Search by Address)
Garmin nüvi 2575R; Garmin eTrex Vista HCx; Android 5.0.1 Phone

eenong89
Posts: 2
Joined: Sun May 29, 2011 2:57 am

Re: MFM-Papago X8 Map 110823 Feedback

Postby eenong89 » Fri Sep 02, 2011 10:52 am

ego wrote:Device:PAPAGO R6100
SOFTWARE VERSION: X8.5
MAP:2011_08_23

Snap0282.jpg


how u update PAPAGO R6100 to x8.5?
any webupdater?

User avatar
alharis299
Champion Polygon Mapper
Champion Polygon Mapper
Posts: 6642
Joined: Sat Oct 17, 2009 10:59 pm
Location: Alor Setar

Re: MFM-Papago X8 Map 110823 Feedback

Postby alharis299 » Fri Sep 02, 2011 2:01 pm

captzot wrote:PPG version : Papago X8.5 Build:Jul 8 2011
Brand/Model: R6300T
Feedback :
From Simpang Ampat, Penang to Tanah Merah, Kelantan, the route suggested was going all the way down to KL, then through Karak to Kuantan and all the way up to destination.

The original MFM PPG version 01-6-11 that came with the unit shows proper way through East-West highway, but suggesting route through Baling at 5°38'66''N 100°49'34''E instead of new highway (Jalan Baling-Grik K173) by-passing Baling town. Ignoring it, it will re-route through K173 until 5°33'40''N 100°53'13''E, then asked you to go back (u-turn). Looks like it was lost between this point until about 7 km later. Then the route continue.

On the way back from Tanah Merah to Penang, your new MAP 110823 will suggest the route through Cameron Highland, taking left turn at Jeli 5°42'26''N 101°50'38''E after driving along Road 4 from Tanah Merah.

The original map was correct for using Road 4 all the way until junction at 5°27'32''N 101°8'14''E. It suggest right turn using old road through Baling instead of using new Jalan Baling-Gerik (which should be a proper path), kept insisting a u-turn after passing the junction.

Sorry for no proper tracking. Draft this feedback with help of Google Earth and memory recollection.

Best regards,
Capt Zot


I've checked with mapsource and My Garmin Nuvi 255W, there's no problem about routing as you mentioned in MFM-Garmin Maps, maybe Papago Map only.
Hope Bro sunn will take a look at this problem.


:rox:
You do not have the required permissions to view the files attached to this post.

User avatar
captzot
Posts: 51
Joined: Thu Mar 11, 2010 11:25 pm

Re: MFM-Papago X8 Map 110823 Feedback

Postby captzot » Fri Sep 02, 2011 10:13 pm

alharis299 wrote:
captzot wrote:PPG version : Papago X8.5 Build:Jul 8 2011
Brand/Model: R6300T
Feedback :
From Simpang Ampat, Penang to Tanah Merah, Kelantan, the route suggested was going all the way down to KL, then through Karak to Kuantan and all the way up to destination.

The original MFM PPG version 01-6-11 that came with the unit shows proper way through East-West highway, but suggesting route through Baling at 5°38'66''N 100°49'34''E instead of new highway (Jalan Baling-Grik K173) by-passing Baling town. Ignoring it, it will re-route through K173 until 5°33'40''N 100°53'13''E, then asked you to go back (u-turn). Looks like it was lost between this point until about 7 km later. Then the route continue.

On the way back from Tanah Merah to Penang, your new MAP 110823 will suggest the route through Cameron Highland, taking left turn at Jeli 5°42'26''N 101°50'38''E after driving along Road 4 from Tanah Merah.

The original map was correct for using Road 4 all the way until junction at 5°27'32''N 101°8'14''E. It suggest right turn using old road through Baling instead of using new Jalan Baling-Gerik (which should be a proper path), kept insisting a u-turn after passing the junction.

Sorry for no proper tracking. Draft this feedback with help of Google Earth and memory recollection.

Best regards,
Capt Zot


I've checked with mapsource and My Garmin Nuvi 255W, there's no problem about routing as you mentioned in MFM-Garmin Maps, maybe Papago Map only.
Hope Bro sunn will take a look at this problem.


:rox:


Thanks for the feedback. I should've brought along my other Eastgear Holux 62E running X3 so that I didn't have to switch between map and have proper track log.

I also observed that the original map (MFM Jun) that comes with my R6300T display less detail as compared to my Holux; like no rivers shown when I passed over them from Penang to Sungai Petani. I guess this is Papago's way of making unit respond faster (???).

Also during my trip to Tanah Merah from Penang, when I passed over the first Banding Bridge (West side of Banding Island); the map just showed I was passing over "green" land. On the other bridge after Banding Island, the right side of the bridge is "green" land and on the left of the bridge was water.

Actually this lake should be shown in Blue, maybe there was some error during conversion from Garmin to Papago Map and it did not detecting blue polygon colour ( for lakes ) and automatically papago will assume it's land area because green is default colour ( for non polygon area ).

Looks like it is not the compile error from Garmin to Papago. My brother was on the same route with the latest Aug map using Nuvi noticed the same thing. Maybe the source itself was already corrupted.

How interesting.....

Zot
Last edited by captzot on Thu Sep 08, 2011 10:52 am, edited 1 time in total.

User avatar
alharis299
Champion Polygon Mapper
Champion Polygon Mapper
Posts: 6642
Joined: Sat Oct 17, 2009 10:59 pm
Location: Alor Setar

Re: MFM-Papago X8 Map 110823 Feedback

Postby alharis299 » Fri Sep 02, 2011 10:41 pm

captzot wrote:
alharis299 wrote:
captzot wrote:PPG version : Papago X8.5 Build:Jul 8 2011
Brand/Model: R6300T
Feedback :
From Simpang Ampat, Penang to Tanah Merah, Kelantan, the route suggested was going all the way down to KL, then through Karak to Kuantan and all the way up to destination.

The original MFM PPG version 01-6-11 that came with the unit shows proper way through East-West highway, but suggesting route through Baling at 5°38'66''N 100°49'34''E instead of new highway (Jalan Baling-Grik K173) by-passing Baling town. Ignoring it, it will re-route through K173 until 5°33'40''N 100°53'13''E, then asked you to go back (u-turn). Looks like it was lost between this point until about 7 km later. Then the route continue.

On the way back from Tanah Merah to Penang, your new MAP 110823 will suggest the route through Cameron Highland, taking left turn at Jeli 5°42'26''N 101°50'38''E after driving along Road 4 from Tanah Merah.

The original map was correct for using Road 4 all the way until junction at 5°27'32''N 101°8'14''E. It suggest right turn using old road through Baling instead of using new Jalan Baling-Gerik (which should be a proper path), kept insisting a u-turn after passing the junction.

Sorry for no proper tracking. Draft this feedback with help of Google Earth and memory recollection.

Best regards,
Capt Zot


I've checked with mapsource and My Garmin Nuvi 255W, there's no problem about routing as you mentioned in MFM-Garmin Maps, maybe Papago Map only.
Hope Bro sunn will take a look at this problem.


:rox:


Thanks for the feedback. I should've brought along my other Eastgear Holux 62E running X3 so that I didn't have to switch between map and have proper track log.

I also observed that the original map (MFM Jun) that comes with my R6300T display less detail as compared to my Holux; like no rivers shown when I passed over them from Penang to Sungai Petani. I guess this is Papago's way of making unit respond faster (???).

Also during my trip to Tanah Merah from Penang, when I passed over the first Banding Bridge (West side of Banding Island); the map just showed I was passing over "green" land. On the other bridge after Banding Island, the right side of the bridge is "green" land and on the left of the bridge was water.

Actually this lake should be shown in Blue, maybe there was some error during conversion from Garmin to Papago Map and it did not detecting blue polygon colour ( for lakes ) and automatically papago will assume it's land area because green is default colour ( for non polygon area ).


How interesting.....

Zot


Return to “Archive (Papago)”

Who is online

Users browsing this forum: No registered users and 32 guests