Help needed: Holux NAV-62F, Papago X3 need latest maps

Feedback for MFM-Papago map/software

Moderators: Moderators, Regional Mappers

Forum rules
NOTE: This forum should be used strictly for feedback of MFM-Papago map only. Issues with other software or devices will be re-directed.
kkloh
Posts: 3
Joined: Sun Aug 24, 2014 1:00 am

Help needed: Holux NAV-62F, Papago X3 need latest maps

Postby kkloh » Sun Aug 24, 2014 1:30 am

Help needed.

I am trying to use my GPS set Holux NAV-62F.

It runs on Papago X3 and my maps installed in the system are currently
1. MFM PPG version 5-7-11
2. Navigasi.net v2.06
3. *SLA Singapore 110931 TMC

As it is already sometime back since I use this set, can any advise me how to
1. Upgrade the software?
2. Download the latest map?

I tried going to eastgear website but its seems not working any more and they do not support Papago maps anymore.

Thanks!

User avatar
moeyhc
Valued Contributor
Posts: 2239
Joined: Wed Sep 17, 2008 10:53 am
Location: Penang - Nuvi 300, 205W, 2575RLM, M1200, M1000B/C, Papago N1

Re: Help needed: Holux NAV-62F, Papago X3 need latest maps

Postby moeyhc » Sun Aug 24, 2014 9:56 pm

We have stopped offering X3 maps long ago. You have to upgrade you navigation to X8.5 or higher to enjoy the free maps HERE.

Note: Upgrading to X8.5 is free from Papago.

Hope this helps... Cheers!
Common Sense Is Not Common.

kkloh
Posts: 3
Joined: Sun Aug 24, 2014 1:00 am

Re: Help needed: Holux NAV-62F, Papago X3 need latest maps

Postby kkloh » Tue Aug 26, 2014 12:40 pm

Thanks for your response.
It is show on the website that it supports

Holux Models
N62, N62E

How about N62F? Will installing X8.5 cause any problems?

User avatar
moeyhc
Valued Contributor
Posts: 2239
Joined: Wed Sep 17, 2008 10:53 am
Location: Penang - Nuvi 300, 205W, 2575RLM, M1200, M1000B/C, Papago N1

Re: Help needed: Holux NAV-62F, Papago X3 need latest maps

Postby moeyhc » Tue Aug 26, 2014 2:22 pm

If your unit can run x3 it should run x8.5 without any problems.... Known problem with older GPS units is the 3D display and map refresh rate can be slow if the RAM is <128Kb.
Common Sense Is Not Common.

kkloh
Posts: 3
Joined: Sun Aug 24, 2014 1:00 am

Re: Help needed: Holux NAV-62F, Papago X3 need latest maps

Postby kkloh » Tue Aug 26, 2014 4:04 pm

That's good!
But I have lots of trouble to get access to the X8.5 software.

Register to
http://support.m3gps.com/index.php

Prompted I have not register my device.
So I tried keying my old holux GPS unit serial no. ME924HX1xxxx.
Then it logs me out from the website.

Looks like nothing can be done.

User avatar
moeyhc
Valued Contributor
Posts: 2239
Joined: Wed Sep 17, 2008 10:53 am
Location: Penang - Nuvi 300, 205W, 2575RLM, M1200, M1000B/C, Papago N1

Re: Help needed: Holux NAV-62F, Papago X3 need latest maps

Postby moeyhc » Wed Aug 27, 2014 5:32 pm

Sorry to hear that... You can try calling M3gps to find out how to send it back for the free upgrade.
Common Sense Is Not Common.

m3support
Posts: 328
Joined: Fri Apr 06, 2012 3:42 pm
Location: Phileo Damansara 2, Petaling Jaya
Contact:

Re: Help needed: Holux NAV-62F, Papago X3 need latest maps

Postby m3support » Fri Nov 14, 2014 4:33 pm

kkloh wrote:Help needed.

I am trying to use my GPS set Holux NAV-62F.

It runs on Papago X3 and my maps installed in the system are currently
1. MFM PPG version 5-7-11
2. Navigasi.net v2.06
3. *SLA Singapore 110931 TMC

As it is already sometime back since I use this set, can any advise me how to
1. Upgrade the software?
2. Download the latest map?

I tried going to eastgear website but its seems not working any more and they do not support Papago maps anymore.

Thanks!


Hi kkloh,

Sorry for the late reply. The answer is yes but you need send over your device to us and it will take about 7 working days to make it done.
M3 Asia Sdn Bhd,

Menara Lien Hoe,
Lot 17.1, 17th Floor,
Persiaran Tropicana,
47410, PJ, Selangor.


Office Tel : +603 7886 2423

Operation Hours:
Monday-Friday : 9am-6pm
Saturday, Sunday & Public Holidays : Closed

jokefong
Posts: 1
Joined: Mon Nov 30, 2009 9:56 am

Re: Help needed: Holux NAV-62F, Papago X3 need latest maps

Postby jokefong » Sun Aug 16, 2015 3:46 pm

Hi

I am in same situation. Any advice to fix it ?


Return to “MFM-Papago map/software feedback”

Who is online

Users browsing this forum: No registered users and 10 guests